• Ballast Replacement T5 HO 4 x 54 Watt - 240 Volt
    Ballast Replacement T5 HO 4 x 54 Watt - 240 Voltclose

    Reliable, high output T5 ballasts. Easy Installation. Please note this is an instant start ballast. Use shunted sockets.

  • Sentinel GPS CHHC-4i (4/Cs)
    Sentinel GPS CHHC-4i (4/Cs)close

    The Sentinel CHHC-4i is the most advanced CO2 controller available on the market today. It incorporates the proprietary S.I.C.E. ? Sentinel Intelligent CO2 Enrichment ? communication and control components and programming that are unique to Sentinel. It allows for communications between Sentinel S.I.C.E series products, providing a level of control never before seen in your greenhouse, garden or grow room. The system works by a Sentinel S.I.C.E. series controller, such as the Sentinel CHHC-4i, measuring and monitoring your growing environment. As the atmospheric CO2 levels change, the controller will tell the Sentinel ICG series generator to increase output, decrease output or go into idle mode...all computer controlled. As the optimal conditions are reached, the S.I.C.E. system can decrease Co2 output, making sure that the user defined optimal level is not overshot.

  • Galaxy Legacy 1000 Electronic Ballast - 120/240 Volt
    Galaxy Legacy 1000 Electronic Ballast - 120/240 Voltclose

    This Galaxy® Select-A-Watt® ballast can operate a 1000 watt lamp at 600, 750, 1000 watts and Turbo Charge®. This ballast will properly drive 600, 750 & 1000 watt lamps. Set the desired wattage on the Select-A-Watt® dial and install the correct lamp. Comes pre-wired with a dual universal lamp cord receptacle that is compatible with all Sun System® brand reflectors as well as other branded reflectors. Smart Volt® brand technology allows ballast operation 120 ? 240 V. Includes a 6 foot 120 volt power cord. Purchase a 240 volt power cord separately (#903082). The Legacy® ballast runs on 120-240 volt power. This ballasts has an extruded aluminum housing that is very lightweight. It features soft starting and fan cooling. The Legacy® ballast is extremely efficient at 99.9%. This state-of-the-art ballast is manufactured to provide today?s serious grower with maximum flexibility & performance.

  • Galaxy LEC 315 Remote Ballast - 120 / 208 / 240 Volt
    Galaxy LEC 315 Remote Ballast - 120 / 208 / 240 Voltclose

    The Galaxy® LEC brand technology 315 ballast is optimized for cutting edge Light Emitting Ceramic® brand technology. This ballast has a thermally optimized non-fan cooled aluminum housing while operating on 50/60 Hz low frequency, square wave, which makes this electronic ballast highly efficient. The Galaxy® LEC brand technology 315 ballast operates at 120-240 Volt or 277 Volt and offers a rated life of 50,000 hours. Galaxy® LEC brand technology 315 Watt dimmable ballast operates a 315 watt ceramic metal halide lamp ANSI: C182 at 50%, 60%, 70%, 80%, 90% & 100%. This ballast comes pre-wired with a lamp cord receptacle that is compatible with all Sun System® LEC® brand reflectors. 906270 includes a 6 foot 120 volt power cord. Purchase a 208/240 volt power cord separately (#903082). 906272 features a hard-wired 6 foot 277 volt power cord with a L7-15p twist lock plug.

  • Nanolux CMH Fixture 315w
    Nanolux CMH Fixture 315wclose

    Ceramic Metal Halide or CMH for short (some refer to it as CDM), is becoming more popular in the horticultural industry. The CMH lamps have a very broad light spectrum which is more similar to the sun itself than any other form of HID lamp. We have taken CMH technology and increased its operational efficiency, making the most comprehensive spectrum of light output for an HID fixture even better. The CMH lamps also have increased efficiency in PAR/Watt compared to other forms of HID lighting. The CMH fixture can be used as a primary veg light, a primary light for SOG applications, or a supplemental full spectrum light for large flowering operations.

    Fully sealed, low frequency ballast is side mounted. The CMH 315 single lamp fixtures vertical lamp mounting position provides an even light footprint. Meets ETL Standards and uses 97% German reflective material. Both Nanolux CMH fixtures can be used with any 315W 3K or 4K horticultural lamp from all the leading quality brands.

    • ETL Listed.
    • 97% GERMAN REFLECTIVE MATERIAL
    • Fully sealed commercial designed ballast
    • NCCS Ready
    • Uses 315W PGZX18 base CMH lamps

  • Nanolux CMH Fixture - 630w
    Nanolux CMH Fixture - 630w close

    Ceramic Metal Halide or CMH for short (some refer to it as CDM), is becoming more popular in the horticultural industry. The CMH lamps have a very broad light spectrum which is more similar to the sun itself than any other form of HID lamp. We have taken CMH technology and increased its operational efficiency, making the most comprehensive spectrum of light output for an HID fixture even better. The CMH lamps also have increased efficiency in PAR/Watt compared to other forms of HID lighting. The CMH fixture can be used as a primary veg light, a primary light for SOG applications, or a supplemental full spectrum light for large flowering operations.n
    n
    nFully sealed, low frequency ballast is side mounted. The CMH 630W dual lamp fixtures allow for any combination of 315W CMH lamp K temperatures. Meets ETL Standards and uses 97% German reflective material. Both Nanolux CMH fixtures can be used with any 315W 3K or 4K horticultural lamp from all the leading quality brands.n
    n
    n

      n
    • ETL Listed.
    • n
    • 97% GERMAN REFLECTIVE MATERIAL
    • n
    • Fully sealed commercial designed ballast
    • n
    • NCCS Ready
    • n
    • Uses 315W PGZX18 base CMH lamps
    • n

  • Nanolux OG APP Ballast - 120/240v - 1000W
    Nanolux OG APP Ballast - 120/240v - 1000Wclose

    As the smallest, lightest, and smartest ballast on the market the, OG lives up to its name. It’s the original “Nano style” ballast, yet it continues to dominate through innovation. The OG is the only ballast on the market that comes with an RF filter that reduces the conducted RF emissions back into the structures electrical wiring. We’ve taken the reliability and quality you’ve come to trust, and added smart ballast capabilities by making it NCCS APP compatible. Not only does this allow you to actively monitor the health of your ballast, it allows you to control many operations including overheat shut-off, voltage surge protection, dim cycles, slow start/slow finish, and more! Like all our ballasts, the OG comes with Random Start technology. Random Start uses an algorithm that will start the ballast within a 0-15 second window. This allows for less initial power draw when using multiple ballasts. The OG ballast is covered by a 3-year warranty. ETL listed for safety.

  • Nanolux MAXpar CMH Lamp 315w
    Nanolux MAXpar CMH Lamp 315wclose

    CERMIC METAL HALIDE LAMP 315W 3K & 4K

    MaxPar CMH lamps are broad spectrum “white” light lamps. MH lamps are predominantly blue spectrum focused and HPS lamps are predominantly red/yellow focused. CMH lamp technology is broad-spectrum based. A CMH lamp has 2.5 times the blue light of an HPS lamp. The 13.4% blue light from CMH lamps is slightly higher than a 50/50 mix of HPS and MH lamps. A CMH lamp has a far more uniform spectral output than any other lamp used in horticultural lighting. MaxPar offers color temperatures in both 3K (3100K) and 4K (4200K) models. CMH lamps are suitable for cloning, flowering, and vegetative growth. MaxPar CMH lamps should be considered a valuable component in any lighting setup.

  • MAXpar Double Ended Metal Halide Lamp 1000W 6K with Jacket
    MAXpar Double Ended Metal Halide Lamp 1000W 6K with Jacketclose

    The only jacketed Metal halide lamp in the industry. A must for running open fixtures for safety. MH lamps are required to be either open fixture rated or the lamp has to be installed in a luminaire with a protective glass shield. Nanolux MaxPar DE MH lamps use their exclusive patent pending secondary outer jacket design. Nanolux MaxPar DE MH lamps use an outer jacket of Borosilicate glass to meet the requirements for rating as an O-type lamp as per the USA National Electric Code 410.73(F)(5) and ANSI standard C78.387.

    Best use with ballasts designed to work with 400V DE lamps

    Inner quartz arc tube with outer Borosilicate protective jacket CRI of 65

    Available in 600w and 1000W